Large Horizontal Pump Sewage Lifting Pumping Station

Large Horizontal Pump Sewage Lifting Pumping Station
Product Introduction:
The DPX pump station belongs to an integrated pump station unit, which includes check valves, pressure transmission devices, controllers, and other integrated pump station units that can be directly installed. Suitable for the application of sewage lifting systems in new construction and renovation of old houses.
Send Inquiry
Description
Technical Parameters
Model: DPX500W-1500

 

Introduction

The Large Horizontal Pump Sewage Lifting Pumping Station is a kind of equipment designed for efficient sewage treatment, which is widely used in urban sewage discharge and industrial wastewater treatment.

 

Features

Intelligent control system
The Large Horizontal Pump Sewage Lifting Pumping Station are equipped with advanced intelligent control systems that can monitor the operating status of the equipment in real time, including parameters such as water level, flow rate and temperature. The system can automatically adjust the working mode of the pump according to the actual situation to ensure that it always maintains the best operating state under different working conditions.

 

Energy-saving and environmentally friendly design
Our products use energy-saving motors, and the energy consumption is reduced by more than 15% compared with traditional equipment. While the pump station efficiently lifts sewage, it effectively reduces the demand for electricity resources and meets environmental protection requirements.

image003
image001

Technology
Pump speed: 2900r/min
Rated flow: 4.1L/s
Maximum flow: 8L/s
Rated head: 15m
Maximum head: 17m
Maximum flow capacity: 50mm
Impeller type: swirl type
Main shaft seal: SIC/SIC

Materials
Pump housingHT200
Impeller: HT200
Main shaft: 2Cr13
Water tank: HDPE

 

Liquid
Liquid temperature range: 0..40℃
Density: 998.2kg/m³

Water Tank
When the water inlet is 150 mm
Total effective capacity: 500L
When the water inlet is 200 mm
Total effective capacity: 450L

Electrical Data
Input power P1: 1.9kW
Output power P2: 1.5kW
Power frequency: 50Hz
Rated voltage: 3x380
Rated current: 3A
Voltage difference: (+6/-10%)
Maximum number of starts per hour: 60
Number of motor poles: 2
Starting method: SD
Protection level: IP68
Insulation level: F
Built-in protector: thermal switch
Cable length: 5m
Motor immersion depth: 6m

Controller
Liquid level sensor (main control): micro air pressure sensor
Micro air pressure display value: 0-1000mm
Liquid level sensor (auxiliary): rod float switch
Sensor cable: 5m
Motor starter: One-to-one
Isolating switch: Power off when cover is opened
Air pressure transmission hose inner
diameter/outer diameter: 6/8mm
Operation mode: S1
Protection level: IP54

Installation And Transportation
Ambient temperature range: 0..45℃
Outlet installation form: flange
Outlet size: DN80; PN10
Equipment net weight: 250kg
Equipment gross weight: 320kg
Origin: Made in China

 


 

Model: DPX500W-2200
image005
image001
 

Technology
Pump speed: 2900r/min
Rated flow: 4.2L/s
Maximum flow: 8.5L/s
Rated head: 16m
Maximum head: 18.5m
Maximum flow capacity: 50mm
Impeller type: swirl type
Main shaft seal: SIC/SIC

Materials
Pump housing:HT200
Impeller: HT200
Main shaft: 2Cr13
Water tank: HDPE

 

Liquid
Liquid temperature range: 0..40℃
Density: 998.2kg/m³

Water Tank
When the water inlet is 150 mm
Total effective capacity: 500L
When the water inlet is 200 mm
Total effective capacity: 450L

Electrical Data
Input power P1: 2.9kW
Output power P2: 2.2kW
Power frequency: 50Hz
Rated voltage: 3x380
Rated current: 4.5A
Voltage difference: (+6/-10%)
Maximum number of starts per hour: 60
Number of motor poles: 2
Starting method: SD
Protection level: IP68
Insulation level: F
Built-in protector: thermal switch
Cable length: 5m
Motor immersion depth: 6m

Controller
Liquid level sensor (main control): micro air pressure sensor
Micro air pressure display value: 0-1000mm
Liquid level sensor (auxiliary): rod float switch
Sensor cable: 5m
Motor starter: One-to-one
Isolating switch: Power off when cover is opened
Air pressure transmission hose inner
diameter/outer diameter: 6/8mm
Operation mode: S1
Protection level: IP54

Installation And Transportation
Ambient temperature range: 0..45℃
Outlet installation form: flange
Outlet size: DN80; PN10
Equipment net weight: 260kg
Equipment gross weight: 330kg
Origin: Made in China

 


 

Model: DPX500W-3000
image008
image001
 

Technology
Pump speed: 2900r/min
Rated flow: 5.6L/s
Maximum flow: 9.7L/s
Rated head: 17.5m
Maximum head: 21m
Maximum flow capacity: 50mm
Impeller type: swirl type
Main shaft seal: SIC/SIC

Materials

Pump housing:HT200
Impeller: HT200

Main shaft: 2Cr13

Water tank: HDPE


Liquid
Liquid temperature range: 0..40℃
Density: 998.2kg/m³

Water Tank
When the water inlet is 150 mm
Total effective capacity: 500L
When the water inlet is 200 mm
Total effective capacity: 450L

 

Electrical Data
Input power P1: 3.9kW
Output power P2: 3.0kW
Power frequency: 50Hz
Rated voltage: 3x380
Rated current: 6A
Voltage difference: (+6/-10%)
Maximum number of starts per hour: 60
Number of motor poles: 2
Starting method: SD
Protection level: IP68
Insulation level: F
Built-in protector: thermal switch
Cable length: 5m
Motor immersion depth: 6m

Controller
Liquid level sensor (main control): micro air pressure sensor
Micro air pressure display value: 0-1000mm
Liquid level sensor (auxiliary): rod float switch
Sensor cable: 5m
Motor starter: One-to-one
Isolating switch: Power off when cover is opened
Air pressure transmission hose inner
diameter/outer diameter: 6/8mm
Operation mode: S1
Protection level: IP54

Installation And Transportation
Ambient temperature range: 0..45℃
Outlet installation form: flange
Outlet size: DN80; PN10
Equipment net weight: 270kg
Equipment gross weight: 340kg
Origin: Made in China

 


 

Model: DPX500W-4000
image011
image001

Technology
Pump speed: 2900r/min
Rated flow: 6.9L/s
Maximum flow: 18.3L/s
Rated head: 14m
Maximum head: 18.5m
Maximum flow capacity: 60mm
Impeller type: swirl type
Main shaft seal: SIC/SIC

Materials

Pump housing:HT200
Impeller: HT200
Main shaft: 2Cr13
Water tank: HDPE


Liquid
Liquid temperature range: 0..40℃
Density: 998.2kg/m³

Water Tank
When the water inlet is 150 mm
Total effective capacity: 500L
When the water inlet is 200 mm
Total effective capacity: 450L

 

Electrical Data
Input power P1: 5.2kW
Output power P2: 4.0kW
Power frequency: 50Hz
Rated voltage: 3x380
Rated current: 8A
Voltage difference: (+6/-10%)
Maximum number of starts per hour: 60
Number of motor poles: 2
Starting method: SD
Protection level: IP68
Insulation level: F
Built-in protector: thermal switch
Cable length: 5m
Motor immersion depth: 6m

Controller
Liquid level sensor (main control): micro air pressure sensor
Micro air pressure display value: 0-1000mm
Liquid level sensor (auxiliary): rod float switch
Sensor cable: 5m
Motor starter: One-to-one
Isolating switch: Power off when cover is opened
Air pressure transmission hose inner
diameter/outer diameter: 6/8mm
Operation mode: S1
Protection level: IP54

Installation And Transportation
Ambient temperature range: 0..45℃
Outlet installation form: flange
Outlet size: DN80; PN10
Equipment net weight: 280kg
Equipment gross weight: 350kg
Origin: Made in China

 


 

Model: DPX500W-5500
image014
image001
 

Technology
Pump speed: 2900r/min
Rated flow: 8.4L/s
Maximum flow: 23.1L/s
Rated head: 22.5m
Maximum head: 26.5m
Maximum flow capacity: 60mm
Impeller type: swirl type
Main shaft seal: SIC/SIC

Materials

Pump housing:HT200
Impeller: HT200
Main shaft: 2Cr13
Water tank: HDPE


Liquid
Liquid temperature range: 0..40℃
Density: 998.2kg/m³

Water Tank
When the water inlet is 150 mm
Total effective capacity: 500L
When the water inlet is 200 mm
Total effective capacity: 450L

 

Electrical Data
Input power P1: 9.8kW
Output power P2: 7.5kW
Power frequency: 50Hz
Rated voltage: 3x380
Rated current: 15A
Voltage difference: (+6/-10%)
Maximum number of starts per hour: 60
Number of motor poles: 2
Starting method: SD
Protection level: IP68
Insulation level: F
Built-in protector: thermal switch
Cable length: 5m
Motor immersion depth: 6m

Controller
Liquid level sensor (main control): micro air pressure sensor
Micro air pressure display value: 0-1000mm
Liquid level sensor (auxiliary): rod float switch
Sensor cable: 5m
Motor starter: One-to-one
Isolating switch: Power off when cover is opened
Air pressure transmission hose inner
diameter/outer diameter: 6/8mm
Operation mode: S1
Protection level: IP54

Installation and transportation
Ambient temperature range: 0..45℃
Outlet installation form: flange
Outlet size: DN80; PN10
Equipment net weight: 300kg
Equipment gross weight: 370kg
Origin: Made in China

 

 

Hot Tags: large horizontal pump sewage lifting pumping station, China large horizontal pump sewage lifting pumping station suppliers, factory, , Large Horizontal Pump Sewage Lifting Pumping Station

Send Inquiry
ONE-STOP SERVICE
Warmly Welcome Your Inquiries And Visiting
contact us