The bathroom sewage elevator, from the literal meaning of the bathroom, can also be understood as raising the sewage in the bathroom to a certain height, and then discharging it through the pipeline to the outdoor sewage inspection well. This is to meet the lifting and discharge requirements for some sewage located at lower positions. Mainly used in the field of basement drainage or same floor drainage.
The first function of the bathroom sewage elevator is to lift the sewage. This is because the elevation of the elevator we installed is much lower than the elevation base of the outdoor ground. Everyone knows that sewage is discharged naturally by its own gravity. If the elevation of the sewage collection site is lower than outdoors, it cannot be discharged by gravity. So, at this point, it is necessary to use a sewage elevator to increase the pressure of the water.
The second function of the bathroom sewage elevator is to collect sewage. Because everyone knows that the sewage generated in our bathroom is not generated in large quantities at once, it is necessary to collect the sewage generated in stages. After collection, it can be lifted and transported outdoors through a hoist.
The third function of the bathroom sewage elevator is to have a certain amount of sewage discharge. For example, if the amount of sewage generated in our bathroom is too large, and the flow rate of the selected water pump is too small, it will cause the sewage to accumulate and there is a possibility of sewage rising. So, corresponding emission requirements must be made before it can be used.
